LTC4307IMS8#PBF Overview
Transport is made easy with power buffer packaging in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It has been packaged into Tube packages, so power buffer is ready to be shipped.There is a universal mout that makes it easy to adapt to various situations.There are a number of types, but this is a typical Buffer, Accelerator.To operate this op amp buffer, it requires a voltage of 2.3V~5.5V volts.In order for the output quality to be maintained, 2 channels must work together.As a result, there is a 2-Wire Bus input that is enabled.There should be a setting of -40°C~85°C for the operating temperature in order to avoid any malfunctions.In addition to I2C - Hotswap, this operational amplifier buffer targets other applications.You can get more pin-to-pin solutions for your specific needs by searching with "LTC4307".The op amp buffer has 8 terminals.Reflow temperature at its peak is calculated to be 250.The splitter is able to perform many demanding tasks when provided with 3.3V voltage.Power buffer pinouts begin with 8 pins.2-Wire Bus is the output format.In addition, it has 8 pins.In other words, it is a 8mA op amp buffer.A Surface Mount hole is available for mounting it on a PCB or another board.In the industry, other Other Interface ICs like the power buffer play an important role.The repeters can be powered by 3.3V power supplies.
LTC4307IMS8#PBF Features
2 channels.
Mainly used in I2C - Hotswap.
A standard Other Interface ICs.
LTC4307IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4307IMS8#PBF Signal Buffers, Repeaters, Splitters applications.
- Backplane Interconnect
- Digital Cross-Connects
- Clock Distribution
- Network Switches/Routers
- Industrial PCs
- Network Switches/Routers
- Cable Repeaters
- DSLAMs
- Clock Distribution
- SATA SSDs or HDDs
