LTC4241CGN#PBF Overview
In the 20-SSOP (0.154, 3.90mm Width) package you will find it.Channel 5 is currently available.A Tube-shaped package holds it.The 20 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 20 pins.The supply voltage 12V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for PCI, PCI-X are available on the device.A feature of Latched Fault, Thermal Limit, UVLO describes it.Using a 3.3V 5V ±12VV power source should be able to power the device.The LTC4241 family includes it.During operation, 20 pins are used.Hot-swappable device has Current Limit, Fault Timeout, Slew Rate programmable features.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 11.4V so that the device can function normally.Vsup is set to 12.6V, the maximum supply voltage.The maximum supply current it requires to operate is 8mA.With the help of this device, ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY can also be produced.In the case of a 14V output voltage, high efficiency can be achieved.
LTC4241CGN#PBF Features
The terminal position of 20
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 14V
LTC4241CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC4241CGN#PBF hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
