LTC4210-2IS6#TRPBF Overview
In the SOT-23-6 Thin, TSOT-23-6 package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 6 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 6 pins.The supply voltage 5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Latched Fault describes it.Using a 2.7V~16.5VV power source should be able to power the device.The LTC4210 family includes it.Hot-swappable device has Current Limit, Fault Timeout, OVP, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 650μA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.7V so that the device can function normally.The maximum supply current it requires to operate is 3.5mA.
LTC4210-2IS6#TRPBF Features
The terminal position of 6
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
LTC4210-2IS6#TRPBF Applications
There are a lot of Linear Technology/Analog Devices
LTC4210-2IS6#TRPBF hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
