LTC4081EDD#PBF Overview
There is a version of it included in the package Tube.With this item, there is a 10-WFDFN Exposed Pad package that comes with it.In this case, the device has a mounting type of Surface Mount.This is the right thing to do: set the temperature to 0°C~70°C TA.In order to operate, the device relies on an analog IC named BATTERY CHARGE CONTROLLER.In order to charge the device, it needs to receive Constant - Programmable current.By using the base part number LTC4081, related parts can be found for this device.The overall number of terminations that can be found in it is 10 as a whole.It is set to 4.2V for the battery pack.10 pins are included in the package.For the product to work correctly, 10 pins are required, and a connection to each pin is required.A supply voltage of no more than 5.5V is required for the device to operate properly.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.500mA is the output current during the operation.The device can operate at as low a supply voltage as possible, such as 3.75V.As far as the input voltage is concerned, it has a minimum of 3.75V volts.There is 5V voltage input on the device.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system.There is a maximum input voltage of 5.5V volts that it can take.This part has a maximum switching frequency of 2750kHz.It is required that a maximum supply voltage of 4.24V be applied as the output voltage for this operation.
LTC4081EDD#PBF Features
Battery pack voltage of 4.2V
10-WFDFN Exposed Pad package
LTC4081EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC4081EDD#PBF Battery Chargers ICs applications.
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
