LTC3863IMSE#PBF Overview
The switching controller fits in the 12-TSSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. 1 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. A 3.5V~60V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of 50kHz~850kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. The 12 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics can be found by searching "LTC3863". Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 3.5V. A maximum voltage of 60V is accepted by the dc to dc regulator as an input voltage.
LTC3863IMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~850kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3863IMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3863IMSE#PBF DC to DC converter applications.
- Large fire protection systems
- Gear/thread machining machines
- Ball screw pair
- Terrestrial set-top boxes
- Laboratories
- Grinders
- Magnetohydrodynamic power
- Solar power plants
- Nuclear power plants
- Machining centers
