LTC3862EFE#PBF Overview
As a result of 24-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4V~36V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 75kHz~500kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Phase Control, Soft Start. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 24. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "LTC3862" will reveal other relevant dc to dc converter ics. 24 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 4V. Statistically, the DC regulator outputs 200V voltage. Voltages 36V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 50mA, so you should note it down when starting a new project. Switching controller operates at 500kHz Hz. Channels 1 are required for high-quality communication.
LTC3862EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
LTC3862EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC3862EFE#PBF DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
