LTC3835IFE#PBF Overview
In the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 4V~36V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 250kHz~530kHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Phase Control, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 20. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics can be found by searching "LTC3835". In total, switching converter has 20 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 10V. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. Voltage regulator dc to dc is designed to operate at 99.4 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 400kHz Hz. 36V is the nominal working voltage. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 36V. Voltage 4V is necessary for the supply. DC switchers cannot produce output currents greater than 5A. The switching converter can output 10V volts at its utmost, according to the datasheet. voltage controllers with a minimum voltage output of 800mV cannot operate. Switching with 1 phases is the property of this controller.
LTC3835IFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 99.4 %
Frequency: 400kHz
LTC3835IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835IFE#PBF DC to DC converter applications.
- Imported equipment
- Low output voltage switching power supply circuits
- Linear guide
- Special machining machine tools
- Product burn-in
- Series voltage regulation circuits
- CMM
- Planers
- Wide-range voltage regulation circuits
- Experimental setup
