LTC3711EGN#PBF Overview
As a result of 24-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 4V~36V. Suitable for a -40°C~85°C TA dc switcher. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. A variety of 24 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3711". There are only 24 pins on switching converter. The minimum input voltage of the dc dc voltage regulator should be 4V. A 2V voltage of DC regulator was detected in the test statistics. Voltages 36V are the maximum that the dc to dc regulator will accept. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. DC regulator300kHz has the maximum frequency. At 2MHz, this controller performs best.
LTC3711EGN#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Switching Frequency: 2MHz
LTC3711EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3711EGN#PBF DC to DC converter applications.
- Digital display device
- Radio equipment
- Various precision measuring instruments
- Industrial robots
- Alternators
- Communication system
- Automation technology
- Series voltage regulation circuits
- Drilling machines
- Medical monitoring systems
