LTC3548EKD-1#TRPBF Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, there are 10 terminations. As this regulator voltage is equipped with an analog IC of the type DUAL SWITCHING CONTROLLER, it is a DUAL SWITCHING CONTROLLER-type voltage regulator. In order to save space, this harley voltage regulator is available in the 10-UFDFN Exposed Pad package. 2 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. 2.25MHz is the switching frequency of this DC-DC switching regulator. A dc to dc voltage regulator's minimum input voltage of 2.5V is required for this voltage regulator to operate. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 1.575V 1.8V. This voltage regulator 12v offers maximum design flexibility with an output current of 700mA 1.2A. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. In this case, the DC/DC regulator belongs to the family LTC3548. The voltage DC DC switching regulator can provide is up to 5.5V volts. In order to operate voltage regulator, there are 10 pins that must be connected. A 1 channel is present on the regulator voltage.
LTC3548EKD-1#TRPBF Features
2 outputs
Peak reflow temperature (Cel) of 260
10 pins
1 channels
LTC3548EKD-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3548EKD-1#TRPBF Voltage Regulators applications.
- Wind power
- Ball screw pair
- Flexible manufacturing cells
- Balance equipment
- Automatic plug-in machines
- Experimental setup
- Imported equipment
- Digital precision reference circuits
- Remotely powered electric motors
- Pipe bending machines
