LTC2917HDDB-B1#TRMPBF Overview
This power management consists of 10 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 10-WFDFN Exposed Pad functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 2.5V volt supply. During operation, the power ic is supplied with a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 10 pins on IC management. This power management system has 10 pins. A voltage (Vsup) that doesn't fall below 800mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using LTC2917, the base power ics number. It requires 2.5V watts of power to operate this voltage supervisor.
LTC2917HDDB-B1#TRMPBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
LTC2917HDDB-B1#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2917HDDB-B1#TRMPBF Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Kitchen appliances
- Insulation fault location system
- DVR
- External alarm
- Radar
- Military electronics
- Battery-powered equipment
- Battery cars
- Precision measurement
