LTC2914IGN-2#PBF Overview
There are 16 terminals on this power management that allow it to be mounted. Tube-packaging is used. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 4 channels that can be found. In this IC management you will find 16-SSOP (0.154, 3.90mm Width) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. In a 4 supply voltage, the PMIC chip conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 16 pins. This power management system has 16 pins. There should be a minimum voltage supply (Vsup) of 2.3V for this PMIC. The supply voltage (Vsup) should not exceed 6.9V volts in this IC power. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. You can always use LTC2914, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate.
LTC2914IGN-2#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V
LTC2914IGN-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2914IGN-2#PBF Voltage Supervisors applications.
- Utility meter
- Kitchen appliances
- Display equipment
- External alarm
- Electronics installed in the vehicle
- Battery-powered equipment
- Consumer electronics
- Electric heating appliances
- Insulation fault location system
- Dash board
