LTC2914CGN-2#PBF Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 4 channels, each of which can be used independently. There are 16-SSOP (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. Power ics operate at 4 supply voltages. This power ic can be sub-categorized as Power Management Circuits. 16 pins are present in total in this power management. Pin count of the power management is 16. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.3V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.9V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. You can always use LTC2914, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3.3V volts to function properly.
LTC2914CGN-2#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V
LTC2914CGN-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2914CGN-2#PBF Voltage Supervisors applications.
- Important electronics for automotive safety
- DC stabilized power supply module
- Detection of phase sequence
- Network equipment
- Radar
- Battery cars
- Power distribution systems of ICU
- Microcontroller system
- Battery-powered equipment
- Satellite navigation
