LTC2909ITS8-3.3#TRMPBF Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 3 functions for your reference. On this supervisor, there is a series of 2 channels that can be found. In this IC management you will find SOT-23-8 Thin, TSOT-23-8 functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 250. IC management conducts in a 3.3V-voltage supply. IC management is possible to find a succession of 3 voltages that have been checked. It has a total of 8 pins that are attached to IC management. The pins of the power management system count 8. Supply voltage (Vsup) should be at least 500mV for this power management. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use LTC2909, the base supervisor number, when searching for similar PMICs from the manufacturer.
LTC2909ITS8-3.3#TRMPBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 500mV
LTC2909ITS8-3.3#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2909ITS8-3.3#TRMPBF Voltage Supervisors applications.
- emergency room
- Consumer electronics
- Battery cars
- Rechargeable batteries
- Radar
- Electric heating appliances
- Digitally controlled LDO regulators circuit
- Automotive permanent magnet synchronous motors
- Smart meter
- Urban rail transit weak current power monitoring
