LTC2908IDDB-A1#TRMPBF Overview
As you can see, this power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 6 channels. The purpose of this IC power is to provide you with a reference of 8-WFDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 5V. Power ics operate at 6 supply voltages. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 8 pins. This power management has 8 pins. IC management can only work with a supply voltage of 500mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is always advisable to use LTC2908, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power.
LTC2908IDDB-A1#TRMPBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 500mV
LTC2908IDDB-A1#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2908IDDB-A1#TRMPBF Voltage Supervisors applications.
- Radio
- Smart meter
- emergency room
- Utility meter
- Detection of phase loss
- Network equipment
- Precision measurement
- Power distribution systems of infant care room
- Analog circuit
- Detection of phase imbalance
