LTC2637HMS-HZ8#PBF Overview
The resolution of this DAC is 8 bits. Compact yet concise, this digital to analog converter in 16-TFSOP (0.118, 3.00mm Width) package provides excellent performance. In terms of its package, this DAC relies on the state-of-the-art Tube package. There is a conversion between the input signal and the Voltage - Buffered signal that is carried out by the DAC. Due to the fact that this device is a D/A CONVERTER, it has lots of benefits to meet a universal purpose. Check all 16 terminations, especially those with onboard capabilities. The top-level pins of this DAC are planted with a number of 16 pins each. DACs can tune 5V's supply voltage. In order to connect the part to the terminals, they are located at the bottom. There are a wide range of applications that can be serviced by this compact and easy-to-mount DAC. The I2C user interface is implemented by this DAC. This DAC is specified to have -40°C~125°C operating temperature for easy use in temperature sensors. A reference signal is acquired from the External, Internal-type circuitry by this ADC. Improvement has been made to this DAC as its peak reflow temperature has increased to 260. There are 5V inputs on the analog pins of this DAC, and the analog input voltage is required to operate it. Its market share in this segment is significant since it is classified as a Other Converters device. In addition to its base part number LTC2637, this DAC comes in a wide variety of variants. An important development requirement of this DAC is that it can handle 5V power supplies. With this DAC it is possible to produce analog outputs of up to 4.096V. Improvements in techniques have allowed DACs to operate at a 1.5mA supply current.
LTC2637HMS-HZ8#PBF Features
16-TFSOP (0.118, 3.00mm Width) package
16 pin count
LTC2637HMS-HZ8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2637HMS-HZ8#PBF Digital to Analog Converters (DAC)?applications.
- Gain and offset adjustment
- Function Generators
- Digitally Controlled Attenuators and Power Supplies
- Instrumentation:
- LMDS/MMDS, point-to-point
- General Purpose Trimming Adjustments
- Low Cost I/O
- Calibration
- Process control equipment
- Synchro Applications
