LTC2636CDE-HMI10#PBF Overview
In the 14-WFDFN Exposed Pad package, you will find it. In order to operate it, a voltage supply of 5V volts is required. An FPGA part from the Other Converters family. FPGA modules can be attached to development boards using a Surface Mount-connector. When operating the machine, it is important to keep the temperature within 0°C~70°C range. There is an FPGA model contained in Tube in order to conserve space. As a whole, it has 14 terminations. If you are looking for related parts, you can use the base part number LTC2636 as a starting point. In this case, there are 14 pins on the board. As long as this FPGA is mounted in Surface Mount, it should be able to function as it should in terms of its specifications, as well as its capabilities. With a 5V supply voltage, designers can fully utili5Ve the flexibility of the device. Power is provided by a 5V battery that is included with the device. I am going to present you with a device that is equipped with 14 pins. This device is capable of supporting a maximum supply voltage of 5.5V. As long as the supply voltage is at least 4.5V, it is able to work properly.
LTC2636CDE-HMI10#PBF Features
14-WFDFN Exposed Pad package
14 pin count
14 pins
LTC2636CDE-HMI10#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2636CDE-HMI10#PBF Digital to Analog Converters (DAC)?applications.
- Calibration
- Precision setpoint control
- Digital Offset & Gain Adjustment
- High-End Compact Disc Players
- Digital Audio Amplifiers
- RF signal generators, arbitrary waveform generators
- Automatic Test Equipment
- Bus Structured instruments
- Waveform Reconstruction
- General Purpose Trimming Adjustments
