LTC2635HMSE-LZ10#PBF Overview
It is supplied in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. In order to operate it, a voltage supply of 3V volts is required. There is a Other Converters family component in this FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. As far as the operating temperature is concerned, it should be kept within -40°C~125°C when operating. In order to save space, this FPGA model has been contained in Tube. There are a total of 10 terminations. In order to find related parts, use the part number LTC2635 as a base. According to its specifications, this FPGA will be able to work fantastically as long as it is mounted in Surface Mount. It operates from a 5V power supply. In addition to this, it has 10 pins. There is a maximum supply voltage of 5.5V that is supported by this product. The minimal supply voltage required for it is 2.7V.
LTC2635HMSE-LZ10#PBF Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
LTC2635HMSE-LZ10#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2635HMSE-LZ10#PBF Digital to Analog Converters (DAC)?applications.
- Motor Control
- Digital Offset & Gain Adjustment
- Software Controlled Gain Adjustment
- Display Electronics
- Level Setting
- Direct Digital Waveform Generation
- Waveform Reconstruction
- Instrumentation
- LMDS/MMDS, point-to-point
- Microprocessor Controlled Circuits
