LTC2314ITS8-14#TRMPBF Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the SOT-23-8 Thin, TSOT-23-8 package.The ADC converter is packaged in the way of Digi-Reel?.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 4.5M Hz.The input type of this electronic AD converter is Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC2314 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V 5V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.1 inputs are employed.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 2.056V.The ADC converter operates from 3/3.35V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 36mW.
LTC2314ITS8-14#TRMPBF Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
3/3.35V power supplies
LTC2314ITS8-14#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2314ITS8-14#TRMPBF ADC applications.
- Industrial Process Control
- Multiplexed Data Acquisition Systems
- Microcontrollers.
- Broadband data applications
- High Speed Data Acquisition
- Cell Phones
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Handheld Terminal Interface
- Imaging Systems
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
