LTC1992CMS8#TRPBF Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Buffer amps of this type are called Differential-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. The input offset voltage is 250μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . This op amp can operate from a supply current at 700μA. The voltage gain should stay at 80dB. This op amp ic outputs Differential, Rail-to-Rail signals, which is one of the many benefits it has. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. It is important to keep the resistance within the 500MOhm range of the linear amplifier.
LTC1992CMS8#TRPBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 500MOhm
LTC1992CMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992CMS8#TRPBF Instrumentational OP Amps applications.
- Multiplication circuits
- High/low-pass filter circuit
- Differentiator circuits
- ECG equipment
- Portable media players
- Commercial audio systems
- Hand-held batteries
- PDA
- Weak signal detection
- RF cable systems
