LTC1732EMS-8.4#PBF Overview
In the Tube package, you will find it.To make it easier for you, it is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.There is a mounting type of Surface Mount for this device.Keeping the temperature at -40°C~85°C TA will ensure reliable performance.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.The device requires Constant - Programmable of current to charge.This part number LTC1732 can be used to find its related parts.In total, there are 10 terminations.In total, it has 10 pins.A number of programmable features are available, including Timer.As far as the charging current is concerned, it is 585mA at full charge.In order for it to work, it requires 10 pins.The number of channels available is 2.A 9V battery should be sufficient.12V supply voltage is not a problem for it.The 8.4V output voltage allows for high efficiency.This device operates with a current output of 500mA.The device falls under the Power Management Circuits subcategory.Using a supply voltage as low as 8.8V will allow it to function.In order to ensure optimum supply voltage, the maximum voltage setting is set to 3mA.The power supply for this part is set to 9V.There is a 8.8V volt minimum input voltage requirement.Voltage input can be as low as 12V volts at its maximum.Voltage 8.4V is the maximum output voltage needed for this operation.
LTC1732EMS-8.4#PBF Features
2 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
LTC1732EMS-8.4#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1732EMS-8.4#PBF Battery Chargers ICs applications.
- Fleet management
- Shop charger
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
