Name: LTC1625IGN#PBF
Brand: Linear Technology/Analog Devices
SKU: LTC1625IGN#PBF
Price: 14.49000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1998
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.635mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	LTC1625
Function	Step-Down, Step-Up/Step-Down
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	36V
Output Type	Transistor Driver
Max Output Current	2A
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive or Negative
Output Current	10A
Voltage - Supply (Vcc/Vdd)	3.9V~36V
Control Features	Enable, Soft Start
Max Output Voltage	5.1V
Topology	Buck, Boost
Min Input Voltage	3.7V
Control Mode	CURRENT-MODE
Frequency - Switching	150kHz
Max Input Voltage	36V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	1.178V
Max Frequency	165kHz
Duty Cycle (Max)	99%
Height	1.478mm
Length	4.98mm
Width	3.988mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LTC1625IGN#PBF Product Details

LTC1625IGN#PBF Overview

In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 3.9V~36V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~85°C TA dc switcher. This switching controller can switch at 150kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 15V. Search for "LTC1625" to find other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 36V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 10A. DC regulator165kHz has the maximum frequency. The maximum input voltage of dc switcher is 36V, so users should limit their voltage accordingly. Voltage 3.7V is needed for the supply. There will be 2A current output from the dc switcher above 2A. As per its datasheet, the switching converter has a maximum output of 5.1V volts. Neither the voltage controller's lowest voltage output 1.178Vr its highest voltage output is less than 1.178V.