LTC1563-3IGN#PBF Overview
This product comes in the form of a 16-SSOP (0.154, 3.90mm Width) package.As far as packaging is concerned, it comes in a Tube package.There is a type of mounting that is Surface Mount for the gadget.There is a Bessel, Low Pass Switched Capacitor filter type assigned to this part.Power sources of 2.7V~11V ±2.7V~5.5V should work.A total of 19 16 pins are located on this board.Among all the components inside the device, the LTC1563 is by far the most important.There is either a cutoff or a center frequency in the device when it is operating at 256kHz frequency.Reflow reaches its peak temperature at 260 when the reflow process is completed.In order to power the component at all times, a source of 4.75V must be present at all times.There are two figures referred to as 1 and A.In order for it to work properly, it should be warmer than -40°C.The maximum working temperature is currently set at 85°C.In this case, 16 will remain the pin number of the component.One is included as part of the Surface Mount mount package, which is included in the price.To make it function properly, it must be supplied with a voltage of 5V in order to function properly.To operate this device, it requires a supply voltage of 1.35V to operate.
LTC1563-3IGN#PBF Features
Supply voltage of 4.75V
Maximum operating temperature of 85°C
Mount of Surface Mount
LTC1563-3IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1563-3IGN#PBF active filters applications.
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
