LTC1421CG-2.5#TRPBF Overview
In the 24-SSOP (0.209, 5.30mm Width) package you will find it.Channel 2 is currently available.A Tape & Reel (TR)-shaped package holds it.The 24 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 24 pins.The supply voltage 5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for General Purpose are available on the device.A feature of Latched Fault, UVLO describes it.Using a 3V~12VV power source should be able to power the device.The LTC1421 family includes it.Hot-swappable device has Circuit Breaker, Fault Timeout, Slew Rate programmable features.Presently, there is a sufficient supply of 1.5mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 3V so that the device can function normally.
LTC1421CG-2.5#TRPBF Features
The terminal position of 24
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
LTC1421CG-2.5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1421CG-2.5#TRPBF hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
