Name: LTC1327CG#TRPBF
Brand: Linear Technology/Analog Devices
SKU: LTC1327CG#TRPBF
Price: 8.28000 USD
Availability: InStock

new-10%

LTC1327CG#TRPBF

Manufacturer part number:LTC1327CG#TRPBF

Manufacturer:Linear Technology/Analog Devices

Description:28 TerminationsLTC1327 Receivers3 Bits 3/5 Drivers/Receivers1 Functions

Case Package:SOT-23

Datasheet:LTC1327CG#TRPBF Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	16 Weeks
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	1996
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Additional Feature	EXTERNAL CHARGE PUMP
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	3.3V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	LTC1327
Pin Count	28
JESD-30 Code	R-PDSO-G28
Qualification Status	Not Qualified
Power Supplies	3.3V
Supply Current-Max	0.5mA
Data Rate	120KBd
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS562
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	3/5
Driver Number of Bits	3
Receiver Number of Bits	5
Duplex	Full
Receiver Hysteresis	400mV
Interface Standard	EIA-562
Receive Delay-Max	800 ns
Transmit Delay-Max	3500 ns
Output Low Current-Max	0.0016A
Out Swing-Min	7.4 V
High Level Input Current-Max	0.000005A
Height Seated (Max)	2mm
Length	10.2mm
Width	5.3mm
RoHS Status	ROHS3 Compliant

LTC1327CG#TRPBF Product Details

LTC1327CG#TRPBF Overview

LED drivers with the enhanced 28-SSOP (0.209, 5.30mm Width) package will be able to drive a variety of common LEDs with ease.The Tape & Reel (TR) package contains this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.A power supply of 3.3V is used by this differential driver.During operation, this electronic part may have up to 3/5 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.3.3V is the supply voltage range that this line driver ic can efficiently operate with.This integrated circuit has 28 terminations designed for driving and receiving signals from data.There are 28 pinouts available on this transceiver which are market standard.You can search with LTC1327 to get more variants of this part, since it identifies the product type, temperature, package, etc.In terms of resolution, this ic receiver was capable of providing a 3-bit resolution.As a rule of thumb, this receiver is typically specified with a resolution of 5 bits.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.The driver IC in this product is designed so that it can be powered by 3.3V.This optical transceiver module also features the EXTERNAL CHARGE PUMP function, improving the overall signal management stability and accuracy.The VCC pin of the ic receiver should receive enough but not more than 0.5mA of input current.