LTC1266CS-3.3#PBF Overview
With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 3.5V~18V. Qualified to work in an dc switcher with 0°C~70°C TA. It can switch at Up to 400kHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are CONSTANT OFF TIME. A DC switcher's nominal voltage of 10V is input. Searching "LTC1266" will return other relevant dc to dc converter ics. In total, switching converter has 16 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 3.5V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 3.33V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 50mA when you start a project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 400kHz for this dc regulators. There should be 3mA current exceeding 3mA supplied to the controller.
LTC1266CS-3.3#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable
CONSTANT OFF TIME
LTC1266CS-3.3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1266CS-3.3#PBF DC to DC converter applications.
- Printing
- Scientific research
- Grinders
- Magnetohydrodynamic power
- Wide-range voltage regulation circuits
- Nuclear power plants
- Textile machinery
- Emergency lighting monitoring equipment
- Arc suppression circuits
- Bending machines
