LTC1197LIS8#PBF Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 8-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.7V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~4V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1197 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2.7V~4V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 4V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The maximal analog input voltage of this electrical AD converter is 2.75V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 500mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 25mW.The minimal analog input voltage of this electrical AD converter is -0.05V.The ADC converter consists of 1 elements.
LTC1197LIS8#PBF Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
1 elements
LTC1197LIS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1197LIS8#PBF ADC applications.
- CMOS Image sensors for mobile applications
- AC motor control
- Wireless and wired broadband communications
- Digital Storage Oscilloscope
- 3-phase power control
- Imaging Systems
- Communications
- Industrial Process Control
- High Speed Data Acquisition for PCs
- Multiplexed Data Acquisition Systems
