LTC1148HVCN-5#PBF Overview
It comes in a 14-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 3.5V~20V voltage are supplied and operated. A 0°C~70°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of Up to 250kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 14 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including CONSTANT OFF TIME. DC switcher's input voltageis 10V volts. LTC1148 can be used to locate other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. 6V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5V. The output value is set to the greatest value of 0.05A. There should be 2.3mA more than 2.3mA amps of current supplied to the controller.
LTC1148HVCN-5#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 250kHz
Current Limit, Enable
CONSTANT OFF TIME
LTC1148HVCN-5#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1148HVCN-5#PBF DC to DC converter applications.
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
