LTC1096LIS8#PBF Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 8-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.65V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 33k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.65V~4V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1096 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The supply/digital voltage of this electrical AD converter is 2.65V~4V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 4V.It operates with the minimal supply voltage of 2.65V.This electrical digital converter operates from a supply voltage of 3V.The maximal analog input voltage of this electrical AD converter is 4.05V.The ADC converter operates from 3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 500mW.The minimal analog input voltage of this electrical AD converter is -0.05V.The ADC converter consists of 1 elements.It is a type of FPGA belonging to the microPOWER? series.
LTC1096LIS8#PBF Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.65V
3V power supplies
1 elements
microPOWER? series
LTC1096LIS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1096LIS8#PBF ADC applications.
- Digital Multimeters, PLC's (Programming Logic Controllers)
- CMOS Image sensors for mobile applications
- Wireless and wired broadband communications
- Displaying
- Cell Phones
- Audio/Video devices
- Rotary encoder
- Transducer
- Music reproduction technology
- Communication test equipment
