LTC1064-7CN#PBF Overview
Packaged in a 14-DIP (0.300, 7.62mm) package, it is easy to install.Packaged in a Tube format, it is a very good product.In the case of this gadget, the mounting type is Through Hole.The filter type for this part is Linear Phase, Low Pass Switched Capacitor.With a power source of ±2.37V~8V, it should work.14-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the LTC1064.In terms of frequency, it is at a cutoff or center frequency of 100kHz.As the reflow temperature reaches NOT SPECIFIED, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.There are a number of filters, called 1, and each filter has a unique figure.As soon as you start the machine, it should be warmer than -40°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 14 is the pin number of the component.Depending on the model, the maximum supply temperature can be raised to 32mA.This is one of a number of Through Hole mount packages that are included with the package.A DC DC switching regulator, in this case, operates by operating on a supply voltage of 5V.The voltage that it needs in order to function correctly is 8V, so the voltage must be applied to it.To make this device work, a supply voltage of 2.375V must be applied.
LTC1064-7CN#PBF Features
Supply voltage of 5V
Maximum operating temperature of 85°C
Mount of Through Hole
LTC1064-7CN#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1064-7CN#PBF active filters applications.
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
- Zoom Spectral Analysis
