LTC1064-2CJ Overview
As far as packaging is concerned, it comes in a 14-CDIP (0.300, 7.62mm) package.There is a Bulk package that comes with it.I would like to point out that the gadget has a Through Hole mounting type.In this case, the part's filter type is Butterworth, Low Pass Switched Capacitor.I believe it should be able to work with a power source of ±2.37V~8V, if it works at all.14-pins are used in total on this board.LTC1064-2 is the best component of the device, because it is the most important part of the device.There is either a cutoff or a center frequency in the device when it is operating at 140kHz frequency.There is always a source of 5V being used to power the component at all times.Filter is important to note that 1 refers to the filter figure.There is a maximum voltage (Vsup) that is reached at location 8V, which is the supply voltage.Filter is important that Filter is warmer than -40°C when Filter is in operation.There is currently a maximum working temperature of 85°C in the system.There is no change in the pin number of the component, as 14 remains the same.There are +-7.5V supplies in the device.Filter is necessary to have a supply voltage, Vsup, which is greater than 2.37V.This device has the capability of handling a maximum supply temperature of 32mA.
LTC1064-2CJ Features
Supply voltage of 5V
Maximum operating temperature of 85°C
LTC1064-2CJ Applications
There are a lot of Linear Technology/Analog Devices
LTC1064-2CJ active filters applications.
- Echo Cancellation
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
