LT4250HCN8#PBF Overview
In the 8-DIP (0.300, 7.62mm) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 8 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.The supply voltage 48V is necessary for high efficiency.As Through Hole would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for -48V are available on the device.A feature of Fault Timeout describes it.Using a -80V~18VV power source should be able to power the device.The LT4250 family includes it.During operation, 8 pins are used.Hot-swappable device has Current Limit, Latched Fault, OVP, UVLO programmable features.Presently, there is a sufficient supply of 1.6mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 20V so that the device can function normally.The maximum supply current it requires to operate is 5mA.
LT4250HCN8#PBF Features
The terminal position of 8
Features of Fault Timeout
Programmable features of Current Limit, Latched Fault, OVP, UVLO
LT4250HCN8#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT4250HCN8#PBF hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
