LT3758IMSE#PBF Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 5.5V~100V. Qualified to work in an dc switcher with -40°C~125°C TJ. This switching controller can switch at 100kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. DUAL are the position of the terminal of the switching converters. Various 10 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. Searching "LT3758" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 100V voltage. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 1MHz for this dc regulators. The dc switcher's maximum input voltage is 100V, so users must limit the voltage accordingly. In order to use a 5.5V voltage supply, switching controller is necessary to have one. There will be 12μA current output from the dc switcher above 12μA. As per its datasheet, the switching converter has a maximum output of 96V volts. A voltage controller's lowest output voltage cannot be less than 1.569V.
LT3758IMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3758IMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3758IMSE#PBF DC to DC converter applications.
- Digital precision reference circuits
- Current source circuits
- Power supplies of electronic gadgets
- Lathes
- Sensitive electronic devices
- Experimental setup
- Motor controller circuits
- Product testing
- Product burn-in
- Driver circuits
