LT3757IDD Overview
With a 10-WFDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. There are Transistor Driver dc switching's output (s) that it can handle. 2.9V~40V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 100kHz~1MHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. DUAL are the position of the terminal of the switching converters. Various 10 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 2.9V. A 7.2V voltage of DC regulator was detected in the test statistics. The dc to dc regulator can only accept a maximum input voltage of 40V. Current is output to the greatest value of 0.02A.
LT3757IDD Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757IDD Applications
There are a lot of Linear Technology/Analog Devices LT3757IDD DC to DC converter applications.
- Photovoltaic power
- PSRR circuits
- Telecommunications equipment
- Hydro power
- Shearing machines
- Constant current circuits
- Medical monitoring systems
- Radio equipment
- Electric water heaters
- Communication system
