LT3509HMSE#PBF Overview
For optimal performance, this voltage regulator makes use of the Tube package. There are 16 terminations in this voltage regulator. There are two types of analog ICs on this voltage regulator. The first type is a DUAL SWITCHING CONTROLLER-type IC. The harley voltage regulator is available as a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package to save space. The voltage regulator 12v has 2 outputs. The adjusting voltage regulator generates Adjustable output. A Surface Mount mounting is required for this switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~150°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 260kHz~2.15MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.8V. This voltage regulator 12v features maximum design flexibility thanks to its 700mA output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 36V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. An input voltage of 12V is required for switching regulator operation. There is a subcategory called Switching Regulator or Controllers that includes this voltage regulator. DC/DC regulators of this type are part of the LT3509 family of voltage regulator 12vs. At 35.3V volts, voltage regulator can provide voltage. The switching regulator operation of the system is controlled by 16 pins. The maximal output voltage of 34.2V allows adjusting voltage regulator for simple operation.
LT3509HMSE#PBF Features
2 outputs
Peak reflow temperature (Cel) of 260
16 pins
LT3509HMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3509HMSE#PBF Voltage Regulators applications.
- Die casting equipment
- CNC system
- Program control systems
- Correction machines
- Automation technology
- Production lines
- Current source circuits
- Grinders
- Computer application technology
- Machining centers
