LT3486EFE#PBF Overview
In order to save board space, the led driver uses the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. Using this LED driver, there are 2 outputs.In order to mount the led light driver, Surface Mount is used.With high reliability and efficiency, this emerges as a DC DC Regulator.The led light driver operates normally at -40°C~85°C TJ. A number of benefits are available to Backlight, Camera Flash.The frequency of 2.2MHz is used as the basis for its operation.In this case, the terminations are set to 16.Under 2.5V voltage supply, undetermined failures may occur.LT3486 is the base part number for the LED driver.16 pins are used on the device.There is a maximum value of 24V supply voltage supported by this device. Further, its characteristics allow it to be classified as Switching Regulator or Controllers.When the device is operated, it has 3V volts assigned to it.It is not recommended to exceed 1.3A in the output current.
LT3486EFE#PBF Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TJ
Frequency of 2.2MHz
LT3486EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3486EFE#PBF LED Driver ICs applications.
- High-end retail lighting
- White LED Backlight for portable equipment
- Down lights
- LED Lightings for Industrial Equipment
- Dimmable LED for vehicle interiors
- Stage and Studio lighting
- General lighting
- Portable lighting
- Amusement Machines
- LED backlight driver for LCD displays for Tablets and Note PCs
