LT1999CS8-20#PBF Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Current Sense-type. A Tube case is used for delivering the op amp. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 500μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 5.8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 26.06dB for the time being. A instrumentation amplifier like this has 1 circuits. The operating supply voltage of the buffer op amp is rated at 5V. During testing, the instrumentation amplifier resistance should remain within a range of 20MOhm. The buffer amplifier consists of 2 amplifiers.
LT1999CS8-20#PBF Features
8 Pins
supply voltage of 5V
26.06dB voltage gain
Resistance of 20MOhm
LT1999CS8-20#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1999CS8-20#PBF Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
