LT1737IGN#PBF Overview
This switching controller fits most application requirements since it is packaged in a 16-SSOP (0.154, 3.90mm Width) package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 4.1V~20V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 90kHz~115kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Enable, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. DC switcher's input voltageis set to 14V. You can find other relevant dc to dc converter ics by searching "LT1737". There are only 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 12.1V voltage according to the test statistics. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. Switching controllers operate at 100kHz frequencies. When the dc switching is dormant, it uses 10mA. It is possible to set the input voltage to 22V for nominal working status.
LT1737IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 90kHz~115kHz
Enable, Soft Start
Frequency: 100kHz
LT1737IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1737IGN#PBF DC to DC converter applications.
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
