LT1641CS8#TRPBF Overview
In the 8-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 8 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.The supply voltage 24V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for General Purpose are available on the device.A feature of Auto Retry describes it.Using a 9V~80VV power source should be able to power the device.The LT1641 family includes it.Hot-swappable device has Current Limit, Fault Timeout, OVP, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 2mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 9V so that the device can function normally.Vsup is set to 80V, the maximum supply voltage.Part 9/80V is associated with power supplies.The maximum supply current it requires to operate is 5.5mA.With the help of this device, UNDERVOLTAGE LOCKOUT; OVERVOLTAGE PROTECTION can also be produced.
LT1641CS8#TRPBF Features
The terminal position of 8
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
LT1641CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices
LT1641CS8#TRPBF hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
