LT1513-2IT7#PBF Overview
There is a package for Tube in which it can be found.We've included it in the TO-220-7 (Formed Leads) package so that it's easier to use.Mounting type for the device is Through Hole.It is recommended that the temperature be set to -40°C~125°C TJ in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LT1513 can be found by following the order of the base part number.It contains a total of 7 terminations.As far as the battery pack is concerned, it is 20V Max.It is equipped with 7 pins.It requires pins 7 to function.Devices require 25V as their maximum supply voltage.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 29V.When the output voltage is 20V, high efficiency is possible.In this case, the output current of the device is set to 2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 2.7V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 5.5mA.The part's power supply is set to a value of 5V.A minimum input voltage of 2.4V volts is required for this device.Voltage input for the device is 5V.Input voltage is limited to 30V volts.In the most extreme case, the part switches at 580kHz.
LT1513-2IT7#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-220-7 (Formed Leads) package
LT1513-2IT7#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1513-2IT7#PBF Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
