LT1513-2CT7#PBF Overview
This can be found in the Tube package.In the package TO-220-7 (Formed Leads), there is a version of it.Mounting type Through Hole is chosen for the device.Temperature 0°C~125°C TJ is recommended for reliable performance.Using an analog IC of type BATTERY CHARGE CONTROLLER, this device is able to communicate with the outside world.To charge the device, you need Constant - Programmable current.Identify its related parts based on the base part number LT1513.There are no terminations in it at all.In the case of the battery pack, it is 20V Max.7 pins are attached to it.When charging current is maximum, it is rated at 2A.For it to work, 7 pins are required.A battery with 0V would be enough for it to run.The board is capable of handling a voltage input of zero volts.A 20V output voltage provides high efficiency.It is in this instance that the device's output current is set to 2A.There is one subcategory of this device, and it is Power Management Circuits.At a low supply voltage, such as 2.7V, it can operate to the best of its ability.During the design process, Vsup (maximum supply voltage) was set to 5.5mA.Regarding the power supply for the part, it is set to 5V.Input voltage must be at least 2.4V volts in order to function.A 5V voltage input is present in the device.It can accept a maximum input voltage of 30V volts.Parts with 580kHz switching frequencies are at most available.
LT1513-2CT7#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-220-7 (Formed Leads) package
LT1513-2CT7#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1513-2CT7#PBF Battery Chargers ICs applications.
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
- Cellphones
