LT1513-2CR#PBF Overview
This can be found in the Tube package.In the package TO-263-8, D2Pak (7 Leads + Tab), TO-263CA, there is a version of it.Mounting type Surface Mount is chosen for the device.Temperature 0°C~125°C TJ is recommended for reliable performance.Using an analog IC of type BATTERY CHARGE CONTROLLER, this device is able to communicate with the outside world.To charge the device, you need Constant - Programmable current.Identify its related parts based on the base part number LT1513.There are no terminations in it at all.In the case of the battery pack, it is 20V Max.7 pins are attached to it.When charging current is maximum, it is rated at 2A.In this case, the device's maximum supply voltage is 25V.A battery with 0V would be enough for it to run.There is one subcategory of this device, and it is Power Management Circuits.During the design process, Vsup (maximum supply voltage) was set to 5.5mA.Regarding the power supply for the part, it is set to 5V.A 5V voltage input is present in the device.Input voltage must be no less than 2.7V volts.Parts with 580kHz switching frequencies are at most available.With this device, the maximum input voltage is 25V.
LT1513-2CR#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package
LT1513-2CR#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1513-2CR#PBF Battery Chargers ICs applications.
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
- Cellphones
