LT1499IS#PBF Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 14 terminations. In this case, there are 14 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 14 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 150μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. A supply current of 1.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 131.6dB. Buffer op amp is equipped with 4 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. C-Load? is the number that corresponds to the series of the buffer op amp.
LT1499IS#PBF Features
14 Pins
supply voltage of 15V
131.6dB voltage gain
Output Type: Rail-to-Rail
LT1499IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1499IS#PBF Instrumentational OP Amps applications.
- Precision measurement
- Proportional counter tubes
- Scintillation detectors
- High-frequency data acquisition systems
- Video computer boards
- Navigation
- Tablets
- Test equipment
- Exponential operation circuits
- High speed sample
