LT1374CR-SYNC#TRPBF Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. Throughout this voltage regulator, there are 7 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. In order to save space, this voltage regulator is packaged in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package. In this case, DC DC switching regulator has 1 outputs configured to it. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. Voltage regulators should be operated at 0°C~125°C TJ temperature while operating. Voltage regulator's switching frequency reaches 500kHz. A dc to dc voltage regulator's minimum input voltage of 5V is required for this voltage regulator to operate. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.42V. It features maximum design flexibility due to dc to dc voltage regulator's 4.5A Switch output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 25V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 15V to meet the operation requirements. DC/DC regulators of this type are part of the LT1374 family of voltage regulator 12vs. A voltage of 21.5V volts can be generated by DC DC switching regulator. There are 7 pins that are used for the operation of the voltage regulator 12v.
LT1374CR-SYNC#TRPBF Features
1 outputs
Peak reflow temperature (Cel) of 260
7 pins
LT1374CR-SYNC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1374CR-SYNC#TRPBF Voltage Regulators applications.
- Servo drive system
- Large fire protection systems
- Special machining machine tools
- Packaging
- Shearing machines
- Experimental setup
- SMT equipment
- Correction machines
- Various precision measuring detectors
- Terrestrial set-top boxes
