LT1357CN8 Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are Voltage Feedback types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. On this buffer amplifier, there are 1 circuits. There is a recommendation that this electrical part be used with a supply with 2mA current rating. This buffer amplifier is assigned within the C-Load? series by its manufacturer. There are a maximum of 600 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
LT1357CN8 Features
8 Pins
supply voltage of 15V
LT1357CN8 Applications
There are a lot of Linear Technology/Analog Devices LT1357CN8 Instrumentational OP Amps applications.
- High gain DC amplifier
- Proportional operation circuits
- Exponential operation circuits
- single/dual op amp sum and difference circuits
- Large motor controllers
- Video conversion and routing
- High/low-pass filter circuit
- Image computer boards
- Voltage regulation circuit
- Weak signal detection
