LT1339ISW#PBF Overview
With a 20-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of Up to 20V. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Phase Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 20 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Search for "LT1339" to find other relevant dc to dc converter ics. There are a total of 20 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 54V. You should note that the dc dc regulator's usual output current is 65mA. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator has a maximum frequency of 150kHz. The dc switcher's maximum input voltage is 60V, so users must limit the voltage accordingly. A voltage of -300mV is required for the supply. There will be 65mA output current greater than 65mA from the dc switcher. There is 1.25V voltage output lower than 1.25V on the voltage controller. The frequency at which this controller performs well is 150kHz.
LT1339ISW#PBF Features
Transistor Driver Outputs
Current Limit, Enable, Phase Control, Soft Start
PULSE WIDTH MODULATION
Switching Frequency: 150kHz
LT1339ISW#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1339ISW#PBF DC to DC converter applications.
- Servo drive system
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
