LT1167IN8#PBF Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are Instrumentation types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 15μV for this buffer op amp. This electronic part is best mounted with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 900μA . A linear amplifier like this has 1 circuits on it. For the operating supply voltage of the op amp ic, there is a rating of 3. This op amp ic is capable of conducting at least 1 voltage gains. In order for the op amp resistance to remain within the 1 TΩ range, the op amp should be tested.
LT1167IN8#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1167IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1167IN8#PBF Instrumentational OP Amps applications.
- Signal operation
- Polarized electrodes
- Vehicle electronics
- Precision measurement
- Semiconductor detectors
- Instrumentation
- ECG equipment
- Fast A/D and D/A converters
- Signal amplification
- Commercial audio systems
