LT1102IN8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A Instrumentation-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 200μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using a supply current of 3.4mA , this buffer op amp will be able to operate. On this instrumentation amplifier, there are 1 circuits that are connected together. There are a total of 2 elements in this linear amplifier. A minimum voltage gain of 10 is the minimum voltage gain that this instrumentation amplifier is capable of producing. Op amp resistance should stay within the range of 1 TΩ.
LT1102IN8#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1102IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1102IN8#PBF Instrumentational OP Amps applications.
- Biopotential
- Computer workstations
- Inverse/same-phase proportional circuit
- Weighing systems
- Signal transformation
- Power generator
- Digital cameras
- ECG equipment
- Gaming industry
- Fission chambers
