LT1101AIN8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a Instrumentation-type. Linear amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. 8 pins are available on the instrumentation amplifier. Op amp ic rates 160μV for input offset voltage. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 92μA volt supply current is needed for this linear amplifier to operate. A instrumentation amplifier like this has 1 circuits. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. There are a maximum of 10 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. Instrumentation amplifier resistance should remain within the range of 12GOhm.
LT1101AIN8#PBF Features
8 Pins
supply voltage of 15V
Resistance of 12GOhm
LT1101AIN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1101AIN8#PBF Instrumentational OP Amps applications.
- Oscilloscopes
- Broadcasting
- Mobile phone
- Computer workstations
- High-frequency data acquisition systems
- Car stereo
- Industrial control system
- Video conversion and routing
- Weighing systems
- Band-pass filter
