LT1018CN8#PBF Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.There is a Pull Up output type for this comparator.As a result, it is designed with Tube package.The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 4.5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type General Purpose .The total number of elements is 2 .The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LT1018 .There is 250μA current flowing in this comparator.Current supply exceeding 250μA could cause disfunction of the compartator.A power supply of 1.1/40V is sufficient for the operation of the device.According to the voltage formula, the part has a voltage gain of 125dB .Normal operation requires 3V operating supply voltage.
LT1018CN8#PBF Features
Pull Up output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 250μA
Voltage Gain: 125dB
LT1018CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1018CN8#PBF linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators
- Body Control Modules
- Motor drives
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Current and voltage sensing
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Portable Battery Monitoring
