HO 6-P Overview
A Module, Single Pass Through package is used for the protection of the current sensors. The devices are protected from damage by the Tray package. Current sensors should only output 25mA current. In the current sensors, the terminations are 5. There is a possibility that these current sensors will supply a voltage of 5V while they are working. Current sensors should be set to 4.5V for the minimum voltage supply. A current sensor should, however, not supply more voltage than 5.5V.
HO 6-P Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~105°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~250kHz
Sensing Current: 6A
Module, Single Pass Through Package
HO 6-P Applications
There are a lot of LEM USA Inc. HO 6-P Current Sensors applications.
- Monitor Motor Operation
- Battery supplied applications
- Frequency, Voltage, and Solar Inverters
- Battery chargers and systems
- Inverter and H-bridge current measurements
- DC motor drives
- OEM Current Sensing
- Leakage Current Sensors
- Proving Switch
- AC variable speed drives
